| Highlights |
|---|
| Number of Ports: |
48 |
| Port Speed: |
10G |
| Port Type: |
Fiber |
| Uplink Ports (fixed): |
no Uplink Ports |
| Layer Type: |
Layer 3 |
Product information:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Front to back airflow desktop, rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ (uplink) |
|
| Performance: |
Switching capacity: 1280 Gbps ¦ Stacking bandwidth: 480 Gbps |
|
| Capacity: |
IPv4 routes: 24000 ¦ NetFlow entries: 96000 ¦ Virtual interfaces (VLANs): 4000 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, IGMP, PIM-SM, PIM-DM, IGMPv3, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MLDv2, MLD |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP) |
|
| Compliant Standards: |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| RAM: |
8 GB |
|
| Flash Memory: |
8 GB |
|
| Status Indicators: |
Port transmission speed, port duplex mode, power, system, active, status |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10GBase-X SFP+ ¦ 4 x 40Gbit LAN QSFP+ uplink ¦ 1 x USB Type A ¦ 1 x management (mini-USB) Type B ¦ 1 x console RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 2 x network stack device |
|
| Power |
| Power Device: |
Internal power supply |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Power Provided: |
750 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Features: |
Front-to-rear air?ow |
|
| Miscellaneous |
| MTBF: |
286,900 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
51.1 cm |
|
| Height: |
4.45 cm |
|
| Weight: |
7.45 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
