| Highlights |
|---|
| Number of Ports: |
48 |
| Port Speed: |
1G |
| Port Type: |
Copper |
| Uplink Ports (fixed): |
no Uplink Ports4 x 1G SFP Option2 x 10G SFP+ / 4 x 1 GB SFP Kombi Option4x 10G SFP+ Option |
| Layer Type: |
Layer 3 |
| POE Ports: |
POE+ |
Product information:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Desktop, rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 (PoE+) |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| PoE Budget: |
435 W |
|
| Performance: |
Switching capacity: 176 Gbps ¦ Stacking bandwidth: 480 Gbps |
|
| Capacity: |
IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
RIP-1, RIP-2, EIGRP, RIPng |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), PoE+, STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
|
| RAM: |
4 GB |
|
| Flash Memory: |
2 GB |
|
| Status Indicators: |
Port transmission speed, port duplex mode, system, status, PoE |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE+ - 30 W ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 management ¦ 2 x network stack device |
|
| Expansion Slots: |
1 (total) / 1 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Power Provided: |
715 Watt |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Miscellaneous |
| MTBF: |
241,050 hours |
|
| Compliant Standards: |
CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, EN 55022 Class A |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
45 cm |
|
| Height: |
4.45 cm |
|
| Weight: |
7.9 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
