| Highlights |
|---|
| Number of Ports: |
48 |
| Port Speed: |
1G |
| Port Type: |
Copper |
| Uplink Ports (fixed): |
no Uplink Ports4 x 1G SFP Option2 x 10G SFP+ / 4 x 1 GB SFP Kombi Option2 x 10 GB-T Option2 x 10G SFP+ / 2 x 1G SFP Kombi /MACSEC Option |
| Layer Type: |
Layer 3 |
| POE Ports: |
POE+ |
Product information:
| General |
| Device Type: |
Switch - 48 ports - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 (PoE+) |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| Performance: |
Switching fabric bandwidth: 160 Gbps ¦ Forwarding performance: 101.2 Mpps |
|
| Capacity: |
Virtual interfaces (VLANs): 1005 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| Jumbo Frame Support: |
9216 bytes |
|
| Max Units In A Stack: |
9 |
|
| Routing Protocol: |
RIP-1, RIP-2, HSRP, static IP routing, RIPng |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing, Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at |
|
| RAM: |
256 MB |
|
| Flash Memory: |
64 MB Flash |
|
| Status Indicators: |
Port status, port transmission speed, port duplex mode, power, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE+ ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX - RJ-45 management ¦ 2 x network stack device |
|
| Expansion Slots: |
1 (total) / 1 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| Cables Included: |
1 x stacking cable - 50 cm |
|
| MTBF: |
139,913 hours |
|
| Compliant Standards: |
TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
49.5 cm |
|
| Height: |
4.45 cm |
|
| Weight: |
7.6 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Humidity Range Operating: |
5 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
