| Highlights |
|---|
| Liczba portów: |
24 |
| Predkosc portu: |
1G |
| Typ portu: |
Miedz |
| Uplink Ports (fixed): |
no Uplink Ports2 x 10G SFP+ / 4 x 1 GB SFP Kombi Option2 x 10 GB-T Option2 x 10G SFP+ / 2 x 1G SFP Kombi /MACSEC Option |
| Layer Type: |
Layer 3 |
| POE Porty: |
UPOE |
Informacje o produkcie:
| General |
| Device Type: |
Switch - 24 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
24 x 10/100/1000 (UPOE) |
|
| Power Over Ethernet (PoE): |
UPOE |
|
| PoE Budget: |
800 W |
|
| Performance: |
Switching fabric bandwidth: 160 Gbps ¦ Forwarding performance: 65.5 Mpps |
|
| Capacity: |
Virtual interfaces (VLANs): 1005 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| Jumbo Frame Support: |
9216 bytes |
|
| Max Units In A Stack: |
9 |
|
| Routing Protocol: |
OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, universal power over Ethernet (UPOE) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at, IEEE 802.3az |
|
| RAM: |
256 MB |
|
| Flash Memory: |
64 MB |
|
| Status Indicators: |
Port status, port transmission speed, port duplex mode, power, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
24 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 UPOE - 60 W ¦ 1 x USB Type A ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 1 x console RS-232 - RJ-45 - RJ-45 ¦ 1 x 100Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 2 x network stack device |
|
| Expansion Slots: |
1 (total) / 1 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Power Provided: |
1100 Watt |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| Rack Mounting Kit: |
Included |
|
| MTBF: |
238,070 hours |
|
| Compliant Standards: |
NEBS level 3, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, AS/NZS 3548 Class A, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Services |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
49.5 cm |
|
| Height: |
4.45 cm |
|
| Weight: |
7.3 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Humidity Range Operating: |
5 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
