Highlights |
Number of Ports: |
24 |
Port Speed: |
10/100mbit |
Port Type: |
Copper |
Uplink Ports (fixed): |
2x 1G SFP |
Layer Type: |
Layer 3 |
Product information:
General |
Device Type: |
Switch - 24 ports - L3 - Managed - stackable |
|
Enclosure Type: |
Rack-mountable 1U |
|
Subtype: |
Fast Ethernet |
|
Ports: |
24 x 10/100 + 2 x SFP |
|
Performance: |
Switching fabric bandwidth: 32 Gbps ¦ Forwarding performance: 6.5 Mpps |
|
Capacity: |
Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
|
MAC Address Table Size: |
12K entries |
|
Jumbo Frame Support: |
9016 bytes |
|
Max Units In A Stack: |
9 |
|
Routing Protocol: |
OSPF, IGRP, RIP, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, IGMP, DVMRP, PIM-SM, static IP routing, PIM-DM, IGMPv3, EIGRP for IPv6, OSPF for IPv6, static IPv6 routing, policy-based routing (PBR) |
|
Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2, CLI |
|
Authentication Method: |
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
Features: |
Layer 3 switching, Layer 2 switching, load balancing, VLAN support, IGMP snooping, manageable, stackable, MAC address filtering, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Virtual Route Forwarding-Lite (VRF-Lite), Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing |
|
Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
Flash Memory: |
32 MB Flash |
|
Status Indicators: |
Port transmission speed, port duplex mode, power, link OK, system, RPS (Redundant Power Supply), link/activity |
|
Expansion / Connectivity |
Interfaces: |
24 x 100Base-TX RJ-45 ¦ 1 x console RJ-45 management ¦ 1 x network stack device x 2 ¦ 2 x SFP |
|
Power |
Power Device: |
Internal power supply |
|
Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
Features: |
Redundant Power System (RPS) connector |
|
Miscellaneous |
MTBF: |
377,260 hours |
|
Compliant Standards: |
TUV, CISPR 22 Class A, GOST, CISPR 24, cUL, GS, NOM, EN55024, EN55022 Class A, CISPR 22, CB, EMC, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 |
|
Software / System Requirements |
Software Included: |
Cisco IOS IP Services |
|
Dimensions & Weight |
Width: |
44.3 cm |
|
Depth: |
29.5 cm |
|
Height: |
4.4 cm |
|
Weight: |
3.7 kg |
|
Environmental Parameters |
Min Operating Temperature: |
0 °C |
|
Max Operating Temperature: |
45 °C |
|
Humidity Range Operating: |
10 - 85% (non-condensing) |
|
Min Storage Temperature: |
-25 °C |
|
Max Storage Temperature: |
70 °C |
|
Humidity Range Storage: |
10 - 85% (non-condensing) |
|