| Highlights |
|---|
| Nombre de ports: |
24 |
| Vitesse du port: |
10/100mbit |
| Type de port: |
Fibre optique |
| Uplink Ports (fixed): |
2x 1G SFP |
| Layer Type: |
Layer 2 |
Informations sur le produit:
| General |
| Device Type: |
Switch - 24 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Fast Ethernet |
|
| Ports: |
24 x 100 Mbit SFP + 2 x Gigabit SFP |
|
| Performance: |
Switching fabric bandwidth: 32 Gbps ¦ Forwarding performance: 6.5 Mpps |
|
| Capacity: |
Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| MAC Address Table Size: |
12K entries |
|
| Jumbo Frame Support: |
9016 bytes |
|
| Max Units In A Stack: |
9 |
|
| Routing Protocol: |
OSPF, RIP, RIP-1, RIP-2, EIGRP, HSRP, IGMP, static IP routing, IGMPv3 |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2, CLI |
|
| Authentication Method: |
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Layer 3 switching, Layer 2 switching, VLAN support, IGMP snooping, manageable, stackable, MAC address filtering, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Virtual Route Forwarding-Lite (VRF-Lite), Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| Flash Memory: |
32 MB Flash |
|
| Status Indicators: |
Port transmission speed, port duplex mode, power, link OK, system, RPS (Redundant Power Supply), link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
24 x 100Base-FX SFP ¦ 1 x console RJ-45 management ¦ 1 x network stack device x 2 ¦ 2 x SFP |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| MTBF: |
349,610 hours |
|
| Compliant Standards: |
TUV, CISPR 22 Class A, GOST, CISPR 24, cUL, GS, NOM, EN55024, EN55022 Class A, CISPR 22, CB, EMC, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.3 cm |
|
| Depth: |
29.5 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
4.1 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 85% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
10 - 85% (non-condensing) |
|
