| Highlights |
|---|
| Nombre de ports: |
48 |
| Vitesse du port: |
1G |
| Type de port: |
Cuivre |
| Uplink Ports (fixed): |
2x X2 10G |
| Layer Type: |
Layer 3 |
Informations sur le produit:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 + 2 x X2 |
|
| MAC Address Table Size: |
12K entries |
|
| Routing Protocol: |
RIP-1, RIP-2, static IP routing, RIPng |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2 |
|
| Authentication Method: |
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| RAM: |
128 MB |
|
| Flash Memory: |
64 MB Flash |
|
| Status Indicators: |
Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x X2 |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Power Consumption Operational: |
151 Watt |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| MTBF: |
166,907 hours |
|
| Compliant Standards: |
FCC Class A certified, TUV GS, CISPR 22 Class A, BSMI CNS 13438 Class A, cUL, NOM, VCCI Class A ITE, EN55024, EN55022 Class A, UL 60950 Third Edition, EN50082-1, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, EN 300 386 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
46 cm |
|
| Height: |
4.5 cm |
|
| Weight: |
8.6 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
0 - 95% |
|
