| Highlights |
|---|
| Number of Ports: |
12 |
| Port Speed: |
10G |
| Port Type: |
Fiber |
| Uplink Ports (fixed): |
no Uplink Ports |
| Layer Type: |
Layer 3 |
Product information:
| General |
| Device Type: |
Switch - 12 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
12 x X2 |
|
| Performance: |
Switching capacity: 60 Gbps ¦ Forwarding performance: 90 Mpps |
|
| Capacity: |
Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
|
| Jumbo Frame Support: |
9216 bytes |
|
| Routing Protocol: |
OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2 |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| Flash Memory: |
64 MB Flash |
|
| Status Indicators: |
Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
12 x 10Gb Ethernet - X2 ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
2 (installed) / 2 (max) |
|
| Power Redundancy: |
Yes |
|
| Power Redundancy Scheme: |
1+1 |
|
| Power Consumption Operational: |
193 Watt |
|
| Miscellaneous |
| MTBF: |
147,001 hours |
|
| Compliant Standards: |
NEBS level 3, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Services |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
49.5 cm |
|
| Height: |
4.5 cm |
|
| Weight: |
10.7 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
0 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
10 - 85% (non-condensing) |
|
