| Highlights |
|---|
| Airflow: |
Fanless |
Product information:
| General |
| Device Type: |
Switch - 8 ports - Managed |
|
| Enclosure Type: |
Desktop, rack-mountable, wall-mountable 1U |
|
| Subtype: |
Fast Ethernet |
|
| Ports: |
8 x 10/100 (PoE+) + 2 x combo Gigabit SFP |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| PoE Budget: |
124 W |
|
| Performance: |
Forwarding performance (64-byte packet size): 4.2 Mpps ¦ Forwarding performance: 10 Gbps |
|
| Capacity: |
Virtual interfaces (VLANs): 1005 |
|
| Jumbo Frame Support: |
9018 bytes |
|
| Routing Protocol: |
OSPF, RIP-1, RIP-2, OSPFv2 |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), fanless, DHCP relay, Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at |
|
| RAM: |
128 MB |
|
| Flash Memory: |
64 MB |
|
| Status Indicators: |
Port status, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
2 x 1000Base-T RJ-45 ¦ 8 x 100Base-TX RJ-45 PoE+ ¦ 1 x management (mini-USB) Type B ¦ 1 x management (RS-232) RJ-45 ¦ 2 x SFP uplink ¦ 1 x USB Type A |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Miscellaneous |
| MTBF: |
373,635 hour(s) |
|
| Compliant Standards: |
GOST, CISPR 24, EN55022, VCCI Class A ITE, EN55024, CISPR 22, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1, GB 4943 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
26.9 cm |
|
| Depth: |
21.3 cm |
|
| Height: |
4.44 cm |
|
| Weight: |
1.86 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
5 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
