| Highlights |
|---|
| Number of Ports: |
24 |
| Port Speed: |
10/100mbit |
| Port Type: |
Copper |
| Uplink Ports (fixed): |
2x 1G SFP/RJ45 Kombi |
| Layer Type: |
Layer 2 |
| POE Ports: |
POE |
Product information:
| General |
| Device Type: |
Switch - 24 ports - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Fast Ethernet |
|
| Ports: |
24 x 10/100 (PoE) + 2 x combo Gigabit SFP |
|
| Power Over Ethernet (PoE): |
PoE |
|
| PoE Budget: |
370 W |
|
| Performance: |
Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps |
|
| Capacity: |
Active VLANs: 64 |
|
| Jumbo Frame Support: |
9018 bytes |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP |
|
| Authentication Method: |
RADIUS, TACACS+ |
|
| Features: |
Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
|
| RAM: |
128 MB |
|
| Flash Memory: |
64 MB |
|
| Status Indicators: |
Port status, port transmission speed, port duplex mode, power, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
24 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 2 x SFP ¦ 2 x 1000Base-T RJ-45 |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| Rack Mounting Kit: |
Optional |
|
| Compliant Standards: |
FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386 |
|
| Software / System Requirements |
| Software Included: |
Cisco LAN Base software |
|
| Dimensions & Weight |
| Width: |
45 cm |
|
| Depth: |
33.2 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
5.4 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
10 - 95% (non-condensing) |
|
