| Highlights |
|---|
| Número de puertos: |
40 |
| Velocidad del puerto: |
10G |
| Tipo de puerto: |
Fibra de vidrio |
| Layer Type: |
Layer 3 |
Información del producto:
| General |
| Device Type: |
Switch - 40 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
40 x 10 Gigabit SFP+ |
|
| Power Over Ethernet (PoE): |
UPOE |
|
| Performance: |
Switching capacity (full duplex): 480 Gbps ¦ Forwarding rate: 720 Mpps |
|
| Capacity: |
Routing table entries: 64000 ¦ Indirect IPv4 routes: 64000 ¦ Host IPv4 routes: 32000 ¦ Indirect IPv6 routes: 32000 ¦ Host IPv6 routes: 16000 ¦ Multicast scale: 48000 ¦ QoS ACL scale: 18000 ¦ Security ACL scale: 18000 ¦ FNF entries: 512000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000 |
|
| MAC Address Table Size: |
64K entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, PIM-SSM, RIPng, MPLS |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF |
|
| Encryption Algorithm: |
256-bit AES |
|
| Features: |
IGMP snooping, Syslog support, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Weighted Random Early Detection (WRED), Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, LLDP support, Remote Switch Port Analyzer (RSPAN), NetFlow, Flexible NetFlow (FNF), MACsec support, built-in ASIC, Location ID Separation Protocol (LISP), Open Shortest Path First (OSPF), VLAN Double Tagging (Q-in-Q), Zero-touch provisioning (ZTP), Switched Port Analyzer (SPAN), Cisco StackWise Virtual |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae |
|
| Processor: |
1: 2.4 GHz |
|
| RAM: |
16 GB - DIMM 288-pin - DDR4 SDRAM |
|
| Flash Memory: |
16 GB |
|
| Built-in Devices: |
RFID tag |
|
| Expansion / Connectivity |
| Interfaces: |
40 x 10GBase-X SFP+ ¦ 2 x USB 3.0 |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 |
|
| Power Provided: |
950 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Features: |
Front-to-rear air?ow |
|
| Miscellaneous |
| MTBF: |
180,640 hours |
|
| Compliant Standards: |
Plug and Play, CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A, CNS 13438 Class A, EN 300 386, KN 61000-4, CAN/CSA-C22.2 No. 60950-1 |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
54.7 cm |
|
| Height: |
4.39 cm |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-20 °C |
|
| Max Storage Temperature: |
65 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
