| Highlights |
|---|
| Number of Ports: |
32 |
| Port Speed: |
100G |
| Port Type: |
Fiber |
| Uplink Ports (fixed): |
no Uplink Ports |
| Layer Type: |
Layer 2Layer 3 |
Product information:
| General |
| Device Type: |
Switch - 32 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
100 Gigabit Ethernet |
|
| Ports: |
32 x 100 Gigabit QSFP28 |
|
| Performance: |
Switching capacity (full duplex): 6.4 Tbps ¦ Forwarding rate: 2 Bpps |
|
| Capacity: |
Routing table entries: 80000 ¦ Indirect IPv4 routes: 212000 ¦ Host IPv4 routes: 90000 ¦ Indirect IPv6 routes: 212000 ¦ Host IPv6 routes: 90000 ¦ Multicast scale: 32000 ¦ QoS ACL scale: 16000 ¦ Security ACL scale: 270000 ¦ FNF entries: 96000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000 |
|
| MAC Address Table Size: |
64K entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF |
|
| Encryption Algorithm: |
256-bit AES |
|
| Features: |
DHCP support, NAT support, PAT support, trunking, MPLS support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Flexible NetFlow (FNF), Multicast Source Discovery Protocol (MSDP), MACsec support, Control plane protection (CoPP), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, CoAP support, Switched Port Analyzer (SPAN) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba |
|
| Processor: |
1: 2.4 GHz |
|
| RAM: |
16 GB |
|
| Flash Memory: |
16 GB |
|
| Built-in Devices: |
RFID tag |
|
| Expansion / Connectivity |
| Interfaces: |
32 x 100Gbit LAN QSFP28 ¦ 2 x USB 3.0 |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
1 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 |
|
| Power Provided: |
1600 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Miscellaneous |
| MTBF: |
212,820 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS XE 16.8.1 |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
53.9 cm |
|
| Height: |
4.39 cm |
|
| Weight: |
11.63 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-20 °C |
|
| Max Storage Temperature: |
65 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
