Highlights |
Number of Ports: |
12 |
Port Speed: |
40G |
Port Type: |
Fiber |
Layer Type: |
Layer 3 |
Product information:
General |
Device Type: |
Switch - 12 ports - L3 - Managed - stackable |
|
Enclosure Type: |
Rack-mountable 1U |
|
Subtype: |
40 Gigabit Ethernet |
|
Ports: |
12 x 40 Gigabit QSFP |
|
Performance: |
Switching capacity (full duplex): 480 Gbps ¦ Forwarding rate: 720 Mpps |
|
Capacity: |
Indirect IPv4 routes: 64000 ¦ Host IPv4 routes: 32000 ¦ Indirect IPv6 routes: 32000 ¦ Host IPv6 routes: 16000 ¦ Multicast scale: 48000 ¦ QoS ACL scale: 18000 ¦ Security ACL scale: 18000 ¦ FNF entries: 512000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000 |
|
MAC Address Table Size: |
64K entries |
|
Jumbo Frame Support: |
9198 bytes |
|
Routing Protocol: |
OSPF, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, PIM-SSM, policy-based routing (PBR), RIPng |
|
Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, NETCONF, RESTCONF |
|
Encryption Algorithm: |
256-bit AES |
|
Features: |
NAT support, IPv6 support, Stateful switchover (SSO), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, MLD snooping, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Flexible NetFlow (FNF), 802.1x authentication, MACsec support, Control plane protection (CoPP), VLAN Double Tagging (Q-in-Q), Private VLAN, Zero-touch provisioning (ZTP), CoAP support, secure boot, Switched Port Analyzer (SPAN), First Hop Security (FHS) |
|
Compliant Standards: |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba |
|
Processor: |
1: 2.4 GHz |
|
RAM: |
16 GB |
|
Flash Memory: |
16 GB |
|
Built-in Devices: |
RFID tag |
|
Status Indicators: |
Status |
|
Expansion / Connectivity |
Interfaces: |
12 x 40Gbit LAN QSFP |
|
Power |
Power Device: |
Internal power supply - hot-plug |
|
Installed Qty: |
2 (installed) / 2 (max) |
|
Power Redundancy: |
Optional |
|
Power Redundancy Scheme: |
1+1 |
|
Power Provided: |
950 Watt |
|
Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
Features: |
Front-to-rear air?ow |
|
Miscellaneous |
Included Accessories: |
2 x North America AC Type A power cables |
|
MTBF: |
179,660 hours |
|
Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR22:2004 Class A, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, EN 300 386, KN 61000-4, CAN/CSA-C22.2 No. 60950-1 |
|
Software / System Requirements |
Software Included: |
Cisco IOS Universal, ONE Essentials Low Term |
|
Dimensions & Weight |
Width: |
44.5 cm |
|
Depth: |
54.7 cm |
|
Height: |
4.39 cm |
|
Weight: |
11.68 kg |
|
Environmental Parameters |
Min Operating Temperature: |
0 °C |
|
Max Operating Temperature: |
40 °C |
|
Humidity Range Operating: |
5 - 90% (non-condensing) |
|
Min Storage Temperature: |
-20 °C |
|
Max Storage Temperature: |
65 °C |
|
Humidity Range Storage: |
5 - 95% (non-condensing) |
|