| Highlights |
|---|
| Wifi Standard: |
Wi-Fi 6 (802.11ax) |
| Port Geschwindigkeit: |
10/100/1000 Mbit/s |
| POE Ports: |
POE |
| Installationsort: |
Indoor |
| Anzahl der Funkgeräte: |
Dual Band |
| Bluetooth: |
integriert |
Produktinformationen:
| General |
| Device Type: |
Radio access point |
|
| Ruggedized Design: |
Indoor |
|
| Width: |
15 cm |
|
| Depth: |
15 cm |
|
| Height: |
3 cm |
|
| Weight: |
329.5 g |
|
| Localisation: |
Belgium, Jordan, Lebanon, Oman, Qatar, Saudi Arabia, United Arab Emirates, Albania, Bulgaria, Cameroon, Czech Republic, Estonia, Lithuania, Mongolia, Iceland, Romania, Sri Lanka, Luxembourg, Hungary, Cyprus, Iraq, Kenya, Nigeria, Uganda, Tanzania, Trinidad, Jamaica, Algeria, Gabon, Liechtenstein, Gibraltar, Malta, Morocco, Monaco, Croatia, Macedonia, Slovakia, Slovenia, Latvia, Libya, Burundi, Namibia, Mauritius, Austria, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, United Kingdom, Greece, Turkey, Ireland, Bahamas, Serbia, Montenegro, Bosnia and Herzegovina |
|
| Networking |
| Form Factor: |
External |
|
| Connectivity Technology: |
Wireless |
|
| Line Coding Format: |
OFDMA |
|
| Data Link Protocol: |
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6) |
|
| Spread Spectrum Method: |
OFDMA |
|
| Frequency Band: |
2.4 GHz, 5 GHz |
|
| Status Indicators: |
Status |
|
| Features: |
DFS support, Maximum Ratio Combining (MRC), 802.1x authentication, cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, 2x2 MU-MIMO technology, secure boot, Target Wait Time (TWT), image signing, Cisco Trust Anchor module, BSS Coloring |
|
| Encryption Algorithm: |
AES, TLS, PEAP, TTLS, WPA2, EAP-SIM, WPA3, EAP-FAST, EAP-TLS, EAP-TTLS |
|
| Authentication Method: |
MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6 |
|
| Aerial |
| Antenna: |
Internal |
|
| Directivity: |
Omni-directional |
|
| Internet of Things (IoT) |
| Communications Technology: |
Bluetooth Low Energy (LE) |
|
| Expansion / Connectivity |
| Interfaces: |
1 x 1000Base-T - RJ-45 ¦ 1 x management - RJ-45 |
|
| Miscellaneous |
| Included Accessories: |
Ceiling grid clip, mounting bracket |
|
| Compliant Standards: |
CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 4268, FCC CFR47 Part 15 C, FCC CFR47 Part 15 B, EN 62209-1, SRRC, EN 50385, EN 62209-2, LP0002, RSS-247, KN32, KN35, AS/NZS CISPR 32 Class B, EN 62368-1, IEC 62368-1, CISPR 32, EN 55032, EN 61000-6-1:2007, EN 60601-1-2:2015, CAN/CSA-C22.2 No. 60950-1, EN 300 328 V2.1.1, ICES-003:2016 issue 6 Class B, EN 301 489-1 V2.1.1, VCCI-CISPR 32:2016, CNS, AS/NZS 2772, EN 301 489-17 V3.1.1, ARPANSA, EN 55035:2017, KN 61000-3-2, KN 61000-3-3, KN 489-1, QCVN, KN 489-17, RSP-100, RSS-GEN, EN 301 893 V2.1.1, QCVN 118:2018, 47 CFR Part 1.1310, 47 CFR Part 2.1091, UL/CUL 62368-1, QCVN 112:2017, Japan Std. 33a, Japan Std. 66, Japan Std. 71 |
|
| Power |
| Power Over Ethernet (PoE) Supported: |
PoE |
|
| Software / System Requirements |
| Software Included: |
CAPWAP Software Image |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
50 °C |
|
| Humidity Range Operating: |
10 - 90% (non-condensing) |
|
